Products   » Housings DSLR » Sea&Sea » Product
NIKON D810 S&S






NIKON D810 S&S


Sea&Sea "top notch" MDX housing in aluminium for Nikon’s flagship camera D810. This is the perfect set up for the “full frame” UW photographer with many additional possibilities like Optical TTL converter, angled viewfinder, excellent port selection and full back up and support from Exposure Underwater with most parts in stock.


More information

The new MDX-D810, for the Nikon D810, has newly designed controls and is compatible with the Optical YS Converter.

Optical YS Converter/N can be built into the housing
Compatible with new Optical YS Converter/N1 for MDX housing which converts the camera’s TTL signal to a light signal. Both TTL and manual strobe photography is possible using a Fiber-Optic Cable II.

Compatible with both the VF180 1.2x and VF45 1.2x viewfinders. By attaching the VF180 (#46112) or the VF45 prism viewfinders (#46111) (magnification ratio of 1.2x) to the housing, the magnification increases by 1.2x and entire field of view can be seen at the same time. Recommended for users committed to strict composition and focusing.

Luminescence stickers. Major controls including levers and buttons will glow in dark environments.

Equipped with movable Focus/Zoom gear. When the focus/zoom dial is pulled out, the gear inside the housing will move outward allowing for lenses with large diameters to be easily mounted.

Main dials are equipped with damper (spring). The main command dial, the sub command dial, shutter release mode dial and diopter adjustment dial have a damper (spring) to provide secure operation. (Controls on the cameras will not slip because of the damper.)

Three ergonomically improved levers. A new design for the shutter lever, AF mode lever, the AF-ON lever, and the movie-record lever has improved the levers ergonomic shape.

Diopter adjustment dial. The camera's diopter adjustment dial can be operated from the housing.

UW housing information

Equipped with two fiber-optic cable sockets.
The housing has two accessory ports. One is designed for N-type strobe connector and the other one is designed for HDMI output.
The port lock is accessible from the outside of the housing.
The camera's lens-lock release button is accessible from the outside of the housing.
The multi selector has been positioned on the right side of the rear case making it easily accessible while holding the grip and operating the camera.
The camera's built-in flash can be activated and deactivated from the housing. (Only when the accessory light-shielding plate is not in use).
Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to avoid electrolysis damage.
Sacrificial Zinc Anode (2 pieces)
Three mounting screw holes are located in the bottom of the housing.
Equipped with the Optical Viewfinder 0.5x as standard. 0.66x and 0.8 may be used as an option.
Built-in leak sensor immediately alerts you to water ingress.
A depth rating of 100m / 330ft makes the housing ideal for tech diving

More information
SEA&SEA'S own site [here]

How to buy an underwater DSLR camera system [here]


Specifications

Construction Body: corrosion-resistant aluminum alloy (machined)
Grip: corrosion-resistant die-cast aluminum alloy
Depth rating 100m / 330ft
Dimensions (WxHxD) 354 x210 x 141mm / 13.9 x 8.3 x 5.6 inches
Weight Approx. 3,200g / 112.9oz.(Housing only)

 

 

 

NIKON D810 S&S

Sea&Sea MDX housing for FX format cameras Nikon D810.
Description: HOUSING S&S MDX-D810
Price: 28 900 SEK/st
Not in stock
Partno: 06173 (Add to Wish list )
Manufacturer: Sea&Sea
Sea&Sea

Back