Products   » Mirrorless & DSLR » Product


A full featured and durable waterproof housing for Sony Alpha A7 IV full frame mirrorless digital cameras.

Please read - Why Exposure Underwater

Please observe that you find smart associated products at the bottom of the page.
Any other product are found in its specific categories

This housing features our robust Dry Lock (DL) port system. "Dry Lock" refers to the placement of the o-ring on the outside of the port mount. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.

Most popular zoom lenses and select lens focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. A large, soft-touch knob on the side of the housing makes fine tuned adjustments a breeze.

Vacuum System
A vacuum valve is installed standard on the side of the housing. The vacuum valve is designed to be low profile to avoid interference with controls. The optional Vacuum Pump with Gauge #IK47011 allows you to draw a vacuum on the housing to check for leaks prior to entering the water.
Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.

M16 Accessory Port
The spare M16 threaded accessory port provides an attachment point for third party accessories including HDMI bulkheads.

This housings supports your choice of shooting with manual strobe exposure or adding a TTL converter depending on your application. The flash bulkhead is located on the top of the case to alleviate strain on the sync cord. You can enjoy the fastest and most accurate TTL exposure on the market by adding the DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe Kit #IK46042 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.

Any Ikelite DS strobe may be used in manual exposure modes by attaching one or two with a compatible electrical sync cord. Current model DS strobes may be used in TTL exposure mode by adding the optional DL2 DS Link TTL Converter and an electrical sync cord.

Non-Ikelite Strobe Compatibility
SEA&SEA & INON strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.


60m depth rating
Compatible with DL system lens ports
Controls are provided for all camera functions except: Diopter adjustment, Rear wheel rotation, Joystick up/down/left/right
1/4-20 thread base mounts with 3.5" spacing
Slightly positive buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
Housing 2121 gram
Tray with left handle 312 gram
229 x 184 x 152 mm
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes

In the Box

Rear O-ring #IK0132.59 (installed)
Front O-ring #IK0132.45 (installed)
Zoom Gear Retainer #IK75900 (installed)
Port Hole Cover #IK0200.92 (installed)
Waterproof Bulkhead Cap #IK9104.7 (installed)
Base with Left-Hand Quick Release Handle #IK4077.67 (installed)
Tool for Zoom Gear Retainer 
.050" Hex Key 
1/16" Hex Key 
Silicone Lubricant 1cc Tube


200DL Underwater Housing for Sony Alpha a7 IV Mirrorless Digital Cameras
Price: 20 950 SEK/Qty
Partno: IK71479 (Add to Wish list )
Brands: Ikelite

Relaterade Artiklar

Mirrorless & DSLR
Hand pump with gauge for vacuum ...
1 050 SEK
Mirrorless & DSLR
Ikelite Right-Hand Quick Release...
950 SEK
Mirrorless & DSLR
Extends the shutter lever arm.
290 SEK
Mirrorless & DSLR
DL2 DS Link Sony TTL Converter I...
4 850 SEK
Mirrorless & DSLR
The ultimate bag to protect and ...
2 350 SEK