Underwater housing Nauticam Canon R7

The Nauticam NA-R7 embodies the experience gained by producing professional housings for Canon's mirrorless cameras.

In the box

1. NA-R7 Housing
2. 90134 Housing O-ring, lubricant, o-ring remover
3. 2x Optical bulkhead caps
4. 2x Handles with mounting balls
5. Charging USB-C (Male/Female) cable adaptor (USB cable is excluded)
6. CR2032 Battery (for moisture alarm and vacuum system)
7. Allen Wrench Set
8. USB-C Male to Female elbow adaptor
9. Housing carry bag and shoulder strap

The housing

Nauticam has designed a N100 to N120 adapter which integrates into the N120 Canon EF port system. Canon's EF to RF mount adapters can be affixed to the camera before insertion into the housing. When using the EOS R7 inside the housing with the adapter and a supported EF lens, the port and extension ring arrangement will be identical to the same setup on a Nauticam Canon N120 DSLR. As the RF-S lens lineup emerges, dedicated port and extension ring combinations will be listed on the new N100 RF-S Port Chart. Two lens release buttons, one for RF and one for EF lenses used with the optional Canon adapter, are located on the front of the housing to make lens removal through the port opening simple.

Dual thumb lever and dual sub-lever are placed by the right handle. The upper thumb lever activates the "AF-On" and the lower the "Menu" or "Q" buttons while the sub-lever corresponds to the "M-Fn" and "Record" buttons. Near the left handle is a thumb lever for "Playback" as well as a dedicated switch to change from using LCD to the EVF.
Large knurled and rubberized control dials access the camera's "main" and "sub" command dials. The two-stage trigger allows for smooth focus and firing activation. Additional buttons for "Menu", "Focus Point Selection" and others are also easily reached from the handles.

The Nauticam vacuum check and leak detection electronics are shipped with the NA-R7 as standard equipment. Combined with an optional accessory #25625 M16 Vacuum Valve II this monitoring system provides constant updates on the water tight and safe-to-dive status of the housing.

Strobes

Flash triggering is achieved via one of two optional Flash Triggers, a manual LED trigger (#26301) or a TTL Flash Trigger (#26321) that use the built-in fiber optic bulkheads with optional fiber-optic cables to trigger supported strobes

The Camera

• 32.5MP APS-C CMOS sensor with Dual Pixel AF
• Up to 30 fps shooting (e-shutter), 15 fps with mechanical
• In-body image stabilization, rated at up to 7 stops
• Oversampled UHD 4K up to 30p, line-skipped or cropped 4K/60p
• 10-bit video as 'PQ' true HDR footage or C-Log
• 2.36M dot OLED viewfinder
• 1.62M dot fully-articulating touchscreen
• Twin UHS-II SD card slot
• Environmental sealing