TTL Converter Ikelite Kit for Sony (DL2 DS)

Internal TTL circuitry or use with certain Ikelite housings for specified Sony cameras

About Sony TTL
TTL or "Thru-the-Lens" flash metering means the camera evaluates the scene and communicates exposure information directly to the compatible flash. The camera automatically adjusts the power output of the external flash so you don't have to.
TTL exposure is faster and typically more accurate than setting the flash output manually.

Electrical flash triggering
Connecting an electrical sync cord is as quick and easy as screwing in a light bulb. Electrical triggering supports greater accuracy, faster rapid firing, and less missed flashes as compared to fiber optic triggering. Use of electrical TTL also dramatically increases strobe battery life.
The included ST1 Sony TTL Hotshoe is necessary for TTL operation with most Ikelite DL housings. See Housing Compatibility information below.

The ultimate flexibility
Switch between TTL and manual flash exposure modes with the simple push of a button. A super bright LED indicator light shows you which mode you are in with a quick glance. When in TTL mode, flash exposure (EV) compensation can be accessed quickly and easily through the camera's menus. The DL2 DS Link fully supports rear curtain sync flash modes.

The DL2 DS Link is independently waterproof sealed and can be used with a wide array of camera models. Simply use a dual sync cord to fire two strobes in TTL from a single DL2 DS Link converter.

Camera Compatibility
Sony A6000, A6300, A6400, A6500
Sony A7, A7R, A7S
Sony A7 II, A7R II, A7S II
Sony A7 III, A7R III
Sony A9

Strobe Compatibility
DS50 strobes: above serial number 75510 with update
DS51 strobes: above serial number 78700
DS125 strobes: above serial number 7928
DS160, DS161 strobes: all

Not compatible with SEA&SEA, INON, or other non-Ikelite strobes