Underwater housing Ikelite for Olympus E-M10 Mark IV (DLM)

Underwater housing Ikelite for Olympus E-M10 Mark IV (DLM)

The 200DLM/A Underwater Housing is the perfect companion allowing use of the Olympus OM-D E-M10 Mark III and Mark IV mirrorless micro four-thirds cameras in or around the water for scuba, snorkeling, surf, pool, or any adventure.
Fiber optic strobe connection is supported only with the E-M10 III camera. Additional of an optional bulkhead and hotshoe is required to use an external flash with the E-M10 IV. Options for adding a flash trigger are:

• B1A Bulkhead # 46002 + Hotshoe # 46071 for manual triggering of Ikelite or non-Ikelite strobes
• DL3 DS Link Panasonic & Olympus TTL Converter Ikelite PT1 Hotshoe and B1A Bulkhead Kit # 46036 for TTL or manual triggering of compatible Ikelite DS strobes
• Fiber optic triggering NOT supported with E-M10 IV camera
• Made in USA
• Compact, full-featured, and built to last

LENS PORT REQUIRED (Sold Separately)

A compatible lens port is required for waterproof operation (sold separately).
Choose the correct port components on the lens you will be shooting.
The port sizes are DL, DLM or the old FL.

Made in USA

Compact, full-featured, and built to last

• Controls for all camera functions except Fn lever, preview button, and diopter adjustment dial
• Strobe Connector
• Fiber Optic Ports
• Port Mount
• DLM (Dry Lock Micro)
• Accessory Port 1/2-20 Thread
• Depth Rating 200 feet (60 meters)
• Weight 2.7 lb
• Dimensions 7.75 x 5.75 x 5.25" (197 x 146 x 133 mm)
• Rear O-Ring 0110
• Front O-Ring 0132.36
  
  

Pre-dive checks

There is no greater assurance than being able to see your camera and o-ring seal through the back of the housing. Our signature open-groove design suspends the rear o-ring in a natural position that is easier to maintain and more reliable than forcing the o-ring into a channel. Once the housing is closed you can see the o-ring form a solid, waterproof seal.

We recommend using a pump with gauge to pull a vacuum on the housing and check for leaks prior to entering the water.

Construction

Our specially formulated ABS-PC blend housing is highly durable yet significantly lighter than aluminum. The light color keeps your camera cooler when shooting in warm, sunny environments.

Lens support

Ikelite lens ports are the lightest on the market, yet robust and capable of standing up to rough surf.
We support a wide variety of lenses. Most popular zoom lenses and select focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. Zoom and focus gears differ depending on which lens you are using.
Lens ports and zoom gears sold separately. Refer to the appropriate port chart for compatibility information.

Wi-Fi transfer

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Compatibility

Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.
Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this housing. 

In the box

• Housing
• Camera Mount for E-M10 Mark IV # 95418 (installed)
• Camera Mount for E-M10 Mark III # 95413
• Rear O-Ring # 0110 (installed)
• Front O-Ring # 0132.36 (installed)
• .050" Hex Key # 0945.11
• 1/16" Hex Key # 0945.16
• Silicone Lubricant 1cc Tube