Underwater housing Ikelite for Canon R10

Ikelite R10 DLM housing are designed from the ground up to provide full camera control and connection for external strobe lighting out of the box.

In the Box

1. Housing
2. Rear O-Ring # 0110 (installed)
3. Front O-Ring # 0132.36 (installed)
4. Waterproof bulkhead cap # 9104.7 (installed)
5. Silicone lubricant 1cc tube

The housing

The DLM-series lens ports are optimized to be the lightest on the market with superb image quality. The materials chosen for our housings and lens ports are chosen to maximize durability and corrosion resistance while minimizing travel weight and cost. Add an optional Vacuum Kit #IK47012 with 1/2” valve to test your housing’s waterproof seals prior to entering the water is available. Use of the vacuum valve requires a compatible Vacuum Pump with gauge (included).

This housings supports your choice of shooting manual strobes or adding TTL electronics depending on your application. The included manual hotshoe with Ikelite ICS-5 bulkhead supports manual strobe exposure with a wide variety of strobes including Ikelite, SEA&SEA, INON, and others. 

Enjoy the fastest and most accurate strobe exposure on the market by adding the DL5 DS Link Canon TTL Converter and CT1 TTL Hotshoe Kit #IK46075 and a compatible Ikelite DS strobe. The DS Link can be programmed to the camera's specific TTL protocol and supports both first curtain and rear curtain sync up to the camera's maximum flash sync speed. Use the camera's built-in wi-fi feature to download photos to another device without removing the camera from the housing.

Lens port is required

A compatible lens port is required for underwater use (sold separately). Choose the correct port components for the lens you will be shooting.

Ikelite Port charts

Specifications

• 60m depth rating
• Compatible with DLM system lens ports
• Controls are provided for all important camera controls;
• Controls are not provided for Depth of field preview button, Multi-function lock button, Multi-controller (can be pushed in for use as a user programmable button)
• 1/4-20 thread base mounts with 3.5" spacing
• Slightly positive buoyancy in fresh water
• Actual buoyancy varies depending on choice of lens and port.
• 2123 g without tray and handle
• 220 x 175 x 165 mm
• Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
• ABS-PC construction is fundamentally corrosion-resistant
• Made in the USA; Individually inspected for fit and water pressure tested to depth
• 2 year limited warranty