Underwater housing Sea&Sea for Sony a1

Underwater housing Sea&Sea for Sony a1

Underwater housing Sea&Sea MDX-A1U for Sony A1
Universal compatibility with Sony Alpha series. The future-oriented mirrorless SLR compatible housing is now fully loaded.

Lens port required

A compatible lens port is required for waterproof operation (sold separately). Choose the correct port components on the lens you will be shooting. We have an extensive stock of Sea&Sea ports for creative solutions.
Link to SEA& SEA PORT CHARTS

FEATURES

Universal design for the future - The back panel is designed to be large

The back acrylic panel is more than twice as large as before to improve visibility of the monitor and reduce the underwater weight.
Furthermore, it is a sustainable design that can be used with new cameras in the future with minimal parts replacement.

Newly designed fiber-optic cable cover

Newly designed fiber-optic cable cover included. Prevents optical cable terminals from falling out and smartly protects light-emitting panels and cable terminals. Includes a strap to prevent loss of the cover.

Leak Alarm Unit as standard equipment

The Leak Alarm Unit, which was previously available as an option, is now included as standard equipment.
It is effective not only for early detection of underwater flooding accidents, but also for protection of equipment by checking its waterproof performance before entry. CR2032 lithium battery included.

Download Leak Alarm Unit Mode Change Instructions

Strobe Synchro System

Three optional strobe connection methods are available.

1.Optical TTL connection
[Product No.50151] Optical YS Converter S2
Compatible with SEA&SEA “Optical YS Converter S1” which converts the strobe light emission signal of the camera to LED light and synchronizes with the SEA&SEA YS strobe. It is a high-performance converter that does not just emit simple light-emitting signals, but also performs TTL auto light control. * The Sony original adapter "ADP-MAA" is no longer required for connection to the camera.

2.Optical manual connection
[Product No.50146] Manual flash trigger
For those who do not need TTL photography, the fiber-optic cable connection enables manual firing of the YS strobe.

3.Electrical connection
[Product No.50147] Strobe connector/N
[Product No.50122] Optional Sync Cord 2-pin Connector
YS strobes can be electrically connected with a sync cord.

Full range of standard equipment

Grip Plus made of silicone material. Robust yet secure fit to hold the housing in place. Lighting can be deployed as desired from the SA8 fixed ball base. Pre-equipped with lanyard hooks for convenient transportation.

Focus Point Movement Settings

To perform "focus point operation" during shooting, please make a custom setting for the focus point in the dial customization of the camera in advance. The focus point can be moved by operating the front/rear dial.

Enhancement Customization Kit

Drive mode/focus mode dials are not available as standard. It can be supported by using the optional kit.
If you want to change the drive mode etc.

Without modification, you can temporarily use it by registering the camera's custom shooting setting in advance and calling up the function, but it is not a perfect substitute

[Product No.50148] α1 customize kit for MDX-αU
Compatible with drive mode dial/focus mode switching lever.

OTHER FEATURES

• The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
• The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
• Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
• All controls have luminescence stickers which glow in dark environment.
• Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as the VF180 1.2x, VF45 1.2x and Optical. Viewfinder 0.66x, 0.8x can be used. ※ Some vignetting occurs.When the VF180 1.2x is mounted on housing, the uper part of the camera's viewfinder cannot be viewed due to vignetting.
• Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
• Tripod screw mount is located on the centre underside of the housing.
• Equipped with under guard to protect from scrach.

Specifications

[Construction]
Body: corrosion-resistant aluminum alloy (machined)
Grip: corrosion-resistant die-cast aluminum alloy
[Depth rating] 100m / 330ft
[Dimensions (WxHxD)] 330 x 169 x 137 mm / 12.9 x 6.6 x 5.4 inches
[Weight] Approx. 2,900g / 102.3oz (Housing only)

Set Items

Silicone grease, O-ring remover, Hex wrench (6mm / for grip dismounting), Hex wrench (4mm / for Lanyard bolt), Hex wrench (2mm), O-ring maintenance manual, Instruction manual (this manual), CR2032 lithium battery (for leak alarm unit), Leak alarm unit manual pump.

Attached accessories to the product

Housing body cap, Fiber-optic cable cover