Strobe Ikelite DS51 II

DS51 II is a compact strobe that only weighs 443 grams. It is great for easy travel, can deliver true TTL flash exposure as well as manual mode.

In the Box

1 pcs DS51 II 50Ws TTL strobe
1 pcs 1" Ball Mount #4081.4
1 pcs Diffuser #0561.2
1 pcs Waterproof Bulkhead Cap #9104.7
1 pcs Silicone Lubricant 1cc tube

Popular for all type of camera users and fits well with smaller units.

If size and weight are your primary deciding factors, the DS51 II is for you. The DS51 II is one of the smallest and lightest strobes in its class weighing in at less than one pound (443g) per strobe. The compact size makes it simple to position the strobe for macro, super macro, and wide angle photography.

Specifications

Depth rating: 100 meters
Power: 1 to 50 Ws
Power Control: 6 stops in 1/2-stop increments
Color temperature: 5700K
Guide number at 1m (ISO 100): 17 full power
Flashes per charge: 300 to 1000 dependent on power setting
Recycle time: 0.1 to 3.5 seconds dependent on power setting
Electrical sync connection: Ikelite ICS 5-pin bulkhead
Battery: 4 AA cell alkaline, NiMH, or NiCad (not included)
Dimensions: 91 mm diameter x 179 mm length
Weight: 443 grams without batteries or mount
Buoyancy: Neutral in fresh water

True TTL

TTL flash exposure takes advantage of your camera's sophisticated light metering system to automatically adjust flash output. In TTL flash mode the camera triggers a pre-flash - before the image is captured - and uses information it receives back to adjust output in time for the photo. Simply leave the strobe in the TTL setting and focus on composition and camera exposure settings. The advantages of TTL metering are far greater than simply variable flash output. TTL improves recycle time, enables burst shooting, and saves battery life of both your camera and your strobe. TTL is critical when shooting fast-moving subjects both large and small.

Flexibility in Triggering

The DS51 II supports a wide variety of triggering methods to fit virtually any application in, out of, and around the water. Trigger the DS51 II directly from your camera using either an electrical sync cord with ICS-5 plug or by adding an optional fiber optic converter. The DS51 II supports exposure communication with most popular camera models using our line of high-accuracy TTL converters. Remote triggering is supported by both optional extension cords and/or optical slave converter. Position your strobes at a distance from your camera for a variety of creative lighting set-ups including cave lighting, off-camera wreck lighting, and pool studio photography.