Nauticam SmallHD Ultra 5 Underwater housing monitor (HDMI, SDI)

The Nauticam NA-Ultra5 is sure to be an indispensable tool for underwater filmmakers.

In the box

• NA-Ultra 5 monitor Housing
• Monitor Hood
• M16 Vacuum Valve II (pre-installed) PN25625
• M28 HDMI 2.0 Adapter (pre-installed) PN25089
• Mounting Ball PN17958
• Spare silicone rubber main O-ring PN 90254
• O-ring removal tool and lubricant
• CR2032 battery
• Allen Wrench Set

The housing

The NA-Ultra5 features two M28 accessory bulkheads at the top of the housing as well as one on the bottom to support cross conversion for surface monitoring. There are dedicated tripod mounting points on the bottom and top of the housing as as M3 x4 threaded holes for use with mounting ball (17958). The NA-Ultra5 comes with (25625) M16 vacuum valve pre-installed as well as Nauticam's vacuum check and leak detection system.

SDI connection

Configuration use the 17926S SDI cable set for use with NA-Ultra5 (integral design for Cinema housing with M28 to use with Ultra5, right angle at each side.) Note: For cinema housings with an M24 bulkhead a special order is required.

Recommended accessories for SDI configuration

25058 M16 SDI Bulkhead
25080 M28 to M16 Step Down Adapter
25060 25060 SDI Cable in 0.4m Length
25064 15m SDI Surface Cable
25065 45m SDI Surface Cable