Home » » Underwater housing Ikelite Sony a7C

Underwater housing Ikelite Sony a7C

Ikelite's a7C housing are designed from the ground up to provide full camera control and connection for external strobe lighting out of the box.
18 450 SEK
Part no: IK71477

Description

Ikelite's a7C housing are designed from the ground up to provide full camera control and connection for external strobe lighting out of the box.

In the Box

  • Housing
  • Rear O-ring # 0132.59 (installed)
  • Front O-ring # 0132.45 (installed)
  • Zoom Gear Retainer # 75900 (installed)
  • Port Hole Cover # 0200.92 (installed)
  • Waterproof Bulkhead Cap # 9104.7 (installed)
  • Base with Left-Hand Quick Release Handle # 4077.67 (installed)
  • Tool for Zoom Gear Retainer # 0945.06
  • .050" Hex Key # 0945.11
  • Silicone Lubricant 1cc Tube

The housing

DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease. Most popular zoom lenses and select lens focus rings can be engaged using simple gearing that puts adjustment right at your fingertips. A vacuum valve is installed standard on the side of the housing. The vacuum valve is designed to be low profile to avoid interference with controls. The optional Vacuum Pump with Gauge #IK47011 allows you to draw a vacuum on the housing to check for leaks prior to entering the water.

M16 Accessory Port
The spare M16 threaded accessory port provides an attachment point for third party accessories including HDMI bulkheads.

TTL Exposure/Strobes
This housings supports your choice of shooting with manual strobe exposure or adding a TTL converter depending on your application. The flash bulkhead is located on the top of the case to alleviate strain on the sync cord. You can enjoy the fastest and most accurate TTL exposure on the market by adding the DL2 DS Link Sony TTL Converter Ikelite ST1 Hotshoe Kit #IK46042 and a compatible Ikelite DS strobe.
SEA&SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off of a hard-wired strobe.

Viewfinders
The included SuperEye Viewfinder provides an enhanced view of the camera's electronic viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder #IK6890.2 or 45° Magnified Viewfinder (Type 1) #IK6891.1

Specifications
60m depth rating
Compatible with DL system lens ports
1/4-20 thread base mounts with 3.5" spacing
Slightly positive buoyancy in fresh water
Actual buoyancy varies depending on choice of lens and port
Housing 2121 gram
Tray with left handle  312 gram
Vacuum valve included (pump sold separately)
Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes

Made in the USA; Individually inspected for fit and water pressure tested to depth
2 year limited warranty

Read more

Specifications