Underwater Monitor Nauticam 7 inch & underwater housing ULTRAHD G7 (SDI & 2K HDMI 1.4)

Underwater Monitor Nauticam 7 inch & underwater housing ULTRAHD G7 (SDI & 2K HDMI 1.4)

Main Features:

• Rotary battery door with lock latch
• Recommended batteries have Built-in intelligent protective circuit of the positive polarity protects against overcharge, over discharge, and short-circuiting.
• 1/4-20UNC x4pcs mounting points on the bottom (for Swivel and Tilt Adjustable Monitor Mount System)
• M3 x4pcs threaded holes on bottom for Mounting Ball (PN.17958)
• Image Control tools: Anamorphic De-Squeeze, Customizable Aspect Ratios, False Color, Focus Assist, Focus Peaking, Histogram, Image Flip, Vector scope, Waveform, Zebra

Specifications

• Dimensions: 204mm (W) × 150mm (H) × 67mm (D)
• Brightness: 3000nit
• Resolution: 1920 x 1200
• Input Signal Formats: 4KP30 with HDMI input
• Input Signal Formats: 2KP60 with SDI input
• HDMI/SDI Support: HDMI in, SDI in & SDI out *1
• Weight in air: 2.5kg (incl. Swivel and Tilt Adjustable Monitor Mount System)
• Buoyance in water: Negative 0.83kg (incl. Swivel and Tilt Adjustable Monitor Mount System)
• Depth Rating: 100m

Recommended Batteries

(Not included) 4x Nitecore NL2160/2160HP 6000mah or 4x NL2153/2153HP 5300mah batteries.

Recommended Battery Charger

(Not included) Nitecore UMS4 Intelligent USB Four-Slot Superb Battery Charger
Run time：Up to 6h at default backlight level 5 (with 4x new NL2160HP 6000mah batteries) *2

Included accessories

Monitor Hood, Swivel and Tilt Adjustable Monitor Mount System

In the box

• 16611 Nauticam 7'' G7 UW ULTRAHD Monitor
• Monitor Hood
• Swivel and Tilt Adjustable Monitor Mount System (attached to camera/Cine. Housing with 2x ¼’’-20 UNC screws)
• Spare O-ring for battery door, O-ring remover and lubricant
• Padded Travel Case

Required Accessories for 16611 to use with HDMI 1.4 input:

25033 Standard HDMI bulkhead with M16 thread (25081 M24-M16 Step Down Adaptor may be required for a certain camera)
25100 HDMI (D-A) 1.4 Cable in 200mm length for NA-a1/FX3/GH6 (for connection from HDMI bulkhead to camera)
*25100 is compatible for NA-a1/FX3/GH6/A9III/a1II/Z9/Z8/Z6III/R1/R5II/GFX100II.
25047 HDMI (D-D) 1.4 cable in 800mm length (for connection between HDMI bulkheads)

Required Accessories for 16611 to use with SDI input:

25058 M16 SDI Bulkhead
25060 SDI cable in 0.4m length (for connection from camera to underside of SDI Bulkhead)
25061 SDI cable in 0.75m length (for connection between SDI Bulkheads)

Required Accessories for 16611 to use with SDI out

25064 SDI surface monitor cable in 15m length (for connection from SDI Bulkhead to Surface Monitor on land)
25605 SDI surface monitor cable in 45m length (for connection from SDI Bulkhead to Surface Monitor on land)