Remote trigger Ikelite fiber optic converter DS strobe

Converts the electrical bulkhead of any Ikelite DS strobe into a fiber optic port.

This is a non-learning, sensor which requires the camera to be in manual flash mode. This Converter will not work with a preflash. The Optical Converter supports manual exposure modes as set on the attached DS strobe. TTL exposure mode is not supported.

High Speed Shooting
If you're shooting a DSLR or mirrorless camera with Nauticam fiber optic converter and want to shoot at high frame rates (4 FPS or faster), then this Converter is the right option for you. The included fiber optic port allows the attachment of Ikelite, SEA&SEA, Olympus, and certain Nauticam fiber optic cables.

Attachment and Use
The Converter simply attaches to the strobe's electrical bulkhead in place of a sync cord connector. 

An individual Converter is needed for each strobe. Use of multiple strobes requires one Converter per strobe. The Converter supports DS50, DS51, DS125, DS160 and DS162 strobes.