Sea&Sea Optical YS Converter/C1 (Canon) for MDX housing (MDX-70D)

Sea&Sea's compact unit that converts the Canon 70D camera's TTL signal to an optical signal.

The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.

* SEA&SEA's Fiber-Optic Cable II are recommended to be used with an Optical YS Converter.  

Compatible housings MDX-70D

Make sure your TTL-converter are updated and compatible with your strobe through the compatibility chart.

Specifications
[Controls] Power ON/Power OFF/TTL mode (indicated by blue lamp)/Manual mode (indicated by green lamp)
* Remaining battery level is indicated by flashing LED lamp.
[Auto Power Off] The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
[Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
[Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours (*2)
[Construction] Aluminum alloy (case)
[Dimensions (WxHxD)] 54.4 x 39.5 x 53.3mm / 2.1 x 1.6 x 2.1 inches (without cable)
[Weight] 54g / 1.9oz.
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.