Strobe Sea&Sea YS-D3 Duo Red
Description
The underwater strobe YS-D3 DUO is a high-end underwater strobe for enthusiasts & Pros alike.
What's in the box?
- YS-D3 DUO Red strobe
- Ball Mount Strobe Adaptor
- Diffuser
- Slicon grease
The strobe
The YS-D3 DUO delivers even and uniform light distribution with a large light output of GN33. Custom settings allow the strobe to be used with high precision with a variety of cameras and shooting styles.
DUO stands for DS-TTL function and RC function. This strobe has integrated the OM-systems remote strobe signal and can be fired remotely by OM-system camera users on land but need to be connected with an optical cable or sync cable when used underwater. Of course, it is also possible to control the amount of light by selecting flash/non-flash or by manual operation. In addition to TTL auto shooting in conjunction with the camera, the camera can also adjust the flash output compensation during TTL auto shooting.
OBSERVE - The YS-D3 DUO has an updated optical sensor that is more sensitive, this is to get a more accurate TTL dimming. What might occur is that when you turn on the strobe without an optical cable connected the strobe start to fire and the green ready light turns to yellow (saftey mode) and the strobe stops working. However, as soon as you connect an optical cable the ready light turns green again and you can use the strobe in a normal fashion again.
High Performance Strobe
Newly designed circuitry and light-emitting unit produces powerful guide number of 33. In addition, a high precision aspherical optical troidal lens has been fitted over the two flash tubes to disperse an even light from the center to the edge. The strobe's beam angle will increase to 110°by attaching the standard accessories Diffuser. When the optional Dome diffuser is attached, beam angle will increase to as wide as 150
Backlight panel that is effective when shooting in dark environments. The indicator color on the back of the YS-D3 changes each time the position of the mode switch is changed. Blue (in DS-TTLII mode), Red (in RC mode), Yellow (in manual mode with pre-flash), and Green (in manual mode without pre-flash) The positioning of the operation system is obvious during night diving.
Specifications
Guide number (ISO 100/m) (land): 33, 28 (with diffuser attached)
Beam Angle: 80°x105° (without diffuser), 100°x110°(with diffuser)
Usable Batteries: 4xAA A: 6V Ni-MH: 4.8V
Number of flashes *1: A: 140 Ni-MH: 220
Recycle time (full) *2: A: 3.5 sec. Ni-MH: 1.7 sec.
Color temperature: 5800K
Color temperature w/diffuser: 5500K
Depth rating :100m / 330ft
Dimensions (WxHxD): 92x111x147mm / 3.6 x 4.4 x 5.8 inches (excluding ball base)
Weight: 610g / 21.5oz (w/o batteries) (excluding ball base)
Underwater weight : Approx.-20g / -0.7oz (incl. batteries ball base)
Exposure contro: DS-TTL II, Light level control dial (GN): 1 / 1.4 / 2 / 2.8 /4 / 5.6 /8 / 11 / 16 / 22 / 33 (11 steps)
Pre-flash cancel function
Auto power OFF function
Sync cord: 5-pin Sync cord/N, Fiber-Optic Cable
Over-pressure relief valve
LED target light (output is adjustable in 2 steps [300lumen/150lumen])
Audible charge signal